Vertrod PTV

The Vertrod PTV is a pneumatically operated sealer built for sealing plastic tubes of various shapes and sizes. This tube sealer is designed with an independently adjustable sealing head and tube rack support shelf to accommodate a large range of tube height requirements. The sealing jaw features a tube mask, custom matched to the size, shape, and thickness of each different tube. The tube mask provides a clean edge, maintaining tube shape around the seal, while also preventing the material from thinning and compromising seal integrity. The tube rack allows for sealing multiple tubes per cycle while maintaining a consistent product position along the sealing jaw.

The Vertrod PTV tube sealer is available in seal lengths ranging from 14” to 36”. The number of tubes that can be sealed per cycle is a factor of flattened tube width and length of seal.

The Vertrod PTV tube sealer is made in the USA and includes a 3 year limited warranty.

  • Seal Lengths: 14”, 20”, 24”, 30”, 36”
  • Seal Width: 1/4″
  • Single side heater bar with opposing pressure bar (rear jaw heated)
  • Time-based thermal impulse sealing system
  • Independent Seal and Cool timers from 0 to 3.75 seconds (.25 second increments)
  • Adjustable height sealing head
  • Adjustable tube rack support shelf to accommodate various product heights
  • One (1) Tube Rack matched to product dimensions and sealing length
  • One (1) Tube Mask matched to product dimensions and sealing length
  • Heavy-duty welded steel frame construction
  • Pneumatic low-pressure jaw close safety system with release if obstruction is detected
  • Foot pedal cycle activation
  • Air requirement (min): 100 psi
  • Electrical requirement: 115V

  • Additional Tube Rack
  • Additional Tube Mask
  • Wider seal widths: 3/8”, 1/2”
  • Dual Seals (parallel): 2 x 1/8”, 2 x 1/4”
  • Bi-active jaws (top and bottom heated seal bars)
  • Water Cool ready heater bar
  • Water re-circulating package
  • Water Chiller and re-circulating components
  • Suretemp™ temperature controller with digital readout (up to 350°F)
  • High Temperature Package (350°- 650°F)
  • Dual palm controls, anti tie down
  • Heavy-duty locking swivel casters
  • Stainless Steel Frame

Why purchase packaging equipment from us?

Have a question? Don't hesitate to contact us.

Type word in empty field to verify: